Home/Products/ Lab Fixtures / Extraction Arm

Fume Extraction Arm Flexible Extraction Arm for Laboratory

Fume Extraction Arm Flexible Extraction Arm for Laboratory

Precautions for the installation and use of the universal exhaust hood: 1. There are pressure bearings and rubber rings in the joints. If the joints are loose, you can properly tighten the joint knobs; 2. Do not push and pull the air collecting hood too hard; 3. Telescopic tube and fixed frame Can not exceed 90 degrees in the vertical plane, otherwise it will rebound; 4. Installation height, the vertical distance between the ceiling and the suction port is up to 2440mm, and the minimum is 1710mm

Send Inquiry

Product Details ofFume Extraction Arm Flexible Extraction Arm for Laboratory

Fume Extraction Arm

Dimension of Laboratory Flexible Fume Extraction Arm

Specification

Joint	High grade PP,to be 360° swiveled,dismantled & assembled easily for cleaning
Joint seal ring	Low-friction treated rubber
Support sprlng/center bolt	Stalnless steel 304
Adjustable joint knob	High grade PP with a molded-in brass nut locking with center bolt
Damper	To manually adjust airflow by a knob
Dome/cup hood	D375mm/200mm,high grade PP red,grey & transparent available
Tube	D110mm PVC
Bracket	High grade PP(ceiling/wall mounted)

Polypropylene Laboratory Flexible Fume Extraction Arm is acid and alkali resistant

Laboratory Flexible Fume Extraction Arm product detail

Laboratory Flexible Fume Extraction Arm

Ceiling Fume Exhaust

Hot Tags: fume extraction arm flexible extraction arm for laboratory, China fume extraction arm flexible extraction arm for laboratory manufacturers, suppliers, factory, fume hood cabinet, Ultra Low Temperature Freezer, , ,

Three-Joint Flexible Fume Extraction Arms

No Information