Epoxy resin plate
For epoxy resin panels, if oil stains and scratches on the surface are caused by metal, rubber, or other similar objects, they can be wiped with a cloth soaked in naphtha or solvent. If you want to maintain the luster of the countertop, wipe the surface with a cloth dipped in oil and dry it with a dry cloth.
1, the most common method is to clean the countertop with 70% concentration of ethanol before and after work.
2,If you are just removing surface dirt, a damp cloth will do; if these dirt are more difficult to wipe, it is recommended that you use a household cleaner, but you cannot use a cleaner with abrasives or wax.
3,Oil scratches caused by metal rubber and similar objects can be wiped with a cloth dipped in naphtha or solvent.
4, regular use of paper towels or clean rags dipped in Crystal Simple Green products for cleaning, polishing, but also can use gloss oil for cleaning and shine.
5, if you want to restore the original luster of the lab bench panel, you can use a cloth dipped in oil to wipe the surface, and then dry it with a dry cloth.
Ceramic plate
Ceramic plate in the use of a layer of plastic plate or rubber mat board to protect, it is recommended not to use hard or sharp objects, move the desktop instrumentation should be gently held and put, avoid dragging.
Physical and chemical board
1,Do not place this material in the environment where the temperature exceeds 135 degrees for a long time.
2,Do not expose this material to open flames, molten metal, metal sparks or sunlight only, and do not use as a surface for chopping
3,The flame of coal vapor lamp or alcohol lamp will damage the surface of this product, so the alcohol lamp or coal vapor lamp must be placed on a tripod to use.
4, the surface of the physical and chemical board is recommended to use warm water, procyanidone or mild detergent cleaning, can be used to wash hands or dishwashing detergent, do not choose to have abrasive, strong acid composition of the detergent in order to avoid damage to the surface, for stubborn stains, can be hypochlorous acid drops in the polluted surface of the physical and chemical board after washing with water.