The method of using an emergency shower device eye washer is as follows:
1. First, make sure you are in a safe position, away from any potential hazardous substances or materials.
2. Check if the emergency shower device and eye washer are in good working condition. If there is any damage or malfunction, stop using them immediately and seek help.
3. Turn on the water source of the emergency shower device. This is usually done by turning a valve or pressing a switch. Ensure that the water flows smoothly and the pressure is moderate.
4. Move your body close to the emergency shower device, making sure your eyes and face are exposed to the water flow.
5. Turn on the water source of the eye washer. This is usually done by turning a valve or pressing a switch. Ensure that the water flows smoothly and the pressure is moderate.
6. Tilt your head to one side, allowing the water to directly flush your eyes. You can gently support your head with your hand to ensure that the water covers the entire area of your eyes.
7. Continue flushing your eyes for at least 15 minutes to thoroughly remove any potentially harmful substances that may remain in your eyes.
8. After flushing, turn off the water sources of both the emergency shower device and eye washer.
9. If possible, seek medical attention promptly and inform the doctor that you have used an emergency shower device eye washer. The doctor may conduct further examinations and treatments.